Model Info Service Info Performance Accessories
Sources/Links Sights & Sounds VF/VFR FAQ ? Home

VSource.org RC36 Exhaust Photos

FL with Motad Pipes and Two Brothers Racing End-Can

0108.jpg
0108.jpg

45.09 Kb
640 x 480
0109.jpg
0109.jpg

52.23 Kb
640 x 480
0110.jpg
0110.jpg

47.21 Kb
640 x 480
0273.jpg
0273.jpg

68.64 Kb
480 x 640
0274.jpg
0274.jpg

67.98 Kb
640 x 480
0275.jpg
0275.jpg

70.74 Kb
640 x 480
0276.jpg
0276.jpg

72.54 Kb
640 x 480
0277.jpg
0277.jpg

73.48 Kb
640 x 480
0279.jpg
0279.jpg

60.24 Kb
640 x 480
0280.jpg
0280.jpg

68.97 Kb
480 x 640

FP with Two Brothers Racing Pipes and Laser Xtreme Underseat End-Cans (and a Center Stand!)

TBR headers next to the "TTS-modified" Motad headers...
P3100015x.jpg

50.93 Kb
480 x 640
(Upon re-assembling the VSource.org RC36, TTS managed to "un-cross" the front down pipes...)
P3100020x.jpg

53.61 Kb
640 x 480
Bit of a clearance problem...
P3100028xy.jpg

63.15 Kb
640 x 480
No problem—but no center stand.
P7060008x.jpg

62.78 Kb
640 x 480
Left-side bracket-extending prototype bracket.
PB080005x.jpg

56.59 Kb
640 x 480
Right-side prototype brackets give plenty of clearance.
PB080006x.jpg

59.85 Kb
640 x 480
Good clearance now!
PB080009x.jpg

47.20 Kb
640 x 480
Looking good on the stand.
PB080010x.jpg

64.83 Kb
640 x 480
Center stand extender brackets, Mark II
PB090002x.jpg

64.80 Kb
640 x 480
These brackets measure 50mm x 60mm x 8mm
PB090003x.jpg

50.89 Kb
640 x 480
But they're just a bit too short: 55mm x 60mm would be ideal.
PB090004x.jpg

46.25 Kb
640 x 480
Stand done (more or less), let's mount the Lasers...
PB100001x.jpg

70.99 Kb
640 x 480
Seems to fit!
PB100006yx.jpg

65.54 Kb
480 x 640
In position; just need the end bit chopped off and a custom link pipe made.
PB100008x.jpg

60.98 Kb
640 x 480
View from the top.
PB100011x.jpg

60.29 Kb
640 x 480
License (number) plate holder mounted.
PB120001x .jpg

121.54 Kb
640 x 480
Bracket is stainless steel.
PB120002x.jpg

104.07 Kb
640 x 480
Another top view.
PB140001x.jpg

81.42 Kb
480 x 640
Side view: plenty of suspension clearance there.
PB140014x.jpg

90.08 Kb
640 x 480
Just need to delete that ugly end-can!
PB140016xy.jpg

151.91 Kb
640 x 480

VSource.org Home Copyright © VSource.org 1999-2005